Epson WF

Epson WF-7710 Driver, Setup, and Software Download

Last Updated:

Epson WF-7710 Driver, Setup, and Software Download. A benefit of Epson wide-format printers is that a lot of the print at the larger 13-by-19-inch format, whereas a ton of others top at 11 by 17 inches. Those added inches provide a significantly bigger print location for your spreadsheets in addition to marketing leaflets.

A few of minority enhancements Epson made from the WF-7610, which the WF-7710 changes, is the larger (4.3-inch, up from 3.5-inch) touch display, and also a revamped, so much more eye-catching console. The larger screen, certainly, makes poking choices on the display less complicated, and also the whole control board itself has a better, state-of-the-art look and feel regarding it.

Epson WF-7710

Epson WF-7710 Review

The WF-7710DWF prints a little faster than we ‘d leave a common A4 matching. It completed our 25-page black text examination at 17ppm, along with finished our more intricate color graphics examination at an affordable 5.4 ppm. It duplex-printed a 10-side color file on 5 sheets at a fair rate of 3.2 ipm.

On A3 paper, five website page of black text finished in 43 seconds, while five graphics-rich color pages took just over 2 minutes. Scaled up, our double examination completed at 2.2 ipm: that might be sluggish, yet extremely number of various other printers can even print on both sides of an A3 sheet.

Both this MFP’s scanner and also its 35-page automatic document feeder top-out at A3, not A3+, but again, the listing of MFPs that can duplex-scan A3 websites is a short one. Capture speeds were sensibly fast, with a preview of a 150dpi A4 image finishing in simply eight secs. Even a 1,200 dpi, 6x4in photo scan took less than a min.

Epson WF-7710 Specs

  • Wireless & Airprint
  • USB, NFC connectivity
  • A4 or A3 printing
  • Scan, Copy & Fax approximately A3
  • Auto duplex printing
  • Indeterminate printing approximately A3
  • Tray capacity as long as 100 sheets
  • 250 sheet paper tray
  • Super tabloid measure to 13 × 19 inches

WF-7710 Driver Operating System(s):

Windows 8 32-bit, Windows 8 64-bit, Windows 7 32-bit, Windows 7 64-bit, Windows Vista 32-bit, Windows Vista 64-bit, Windows XP 32-bit, Windows XP 64-bit, Mac OS X (v10.8.x), Mac OS X (v10.7.x), Mac OS X (v10.6.x), Mac OS X (v10.5.8)

Epson WF-7710 Driver and Software Download

Driver

Operating System Size Download
Drivers and Utilities Combo Package Installer 11.4 MB
Printer Driver v2.63.01 36.6 MB
Scanner Driver and Epson Scan 2 Utility v6.4.0.0 26.2 MB
Remote Print Driver v1.66 9.08 MB

Software

Operating System Size Download
Fax Utility v2.56 21.7 MB
Event Manager v3.11.21 17.0 MB
Software Updater v4.4.11 6.37 MB
Connect Printer Setup Utility v1.41 3.99 MB
EpsonNet Config Utility v4.9.5 1.07 MB
Scan OCR Component v3.00.04 32.5 MB

Firmware Update

Operating System Size Download
Recovery Mode Firmware version FA27HC 35.6 MB
Recovery Mode Firmware FA27HA 35.6 MB

Scanner Driver

Operating System Size Download
Scan OCR Component v3.00.04 70.5 MB
Scanner Driver and Epson Scan 2 Utility v6.4.0.0 26.2 MB

How to install drivers Epson WF-7710?

Model 1: How to install Epson WF-7710 All-in-One Printer driver.

Using installation CD, how to install Epson WF-7710 All-in-One Printer driver.

Requirements:

  1. Ensure your computer is with CD/DVD drive.
  2. Need installation disc of Epson WF-7710 which came along with accessories bundle.
  3. USB cable to connect with Epson WF-7710.

Guidelines to install Epson WF-7710 All-in-One Printer driver via CD/DVD drive.

  • Switch on your computer where you want to install Epson WF-7710 All-in-One Printer driver.
  • Until unless you asked to connect USB to the computer, please don’t plug it.
  • Just put in CD/DVD into your computer and execute the setup file. It triggers to start the installation wizard, then Follows the instruction until to finish it.
  • While the process you will be asked to connect USB cable between Epson WF-7710 and computer.
  • Wait for that and connect only when it asks you to connect. It will detect the Epson WF-7710 and go ahead to next step if all goes well.
  • Input the values for each step in the wizard and complete the install.
  • Now you can print from Epson WF-7710 as the driver has installed.
Model 2: How to install Epson WF-7710 All-in-One Printer driver.

Using setup file (without CD/DVD), how to install Epson WF-7710 All-in-One Printer driver.

Requirements:

  1. Download setup file of respective Epson WF-7710 All-in-One Printer driver from the above-recommended link or Drivers & Downloads
  2. USB cable to connect to the printer.

Guidelines to install the driver for Epson WF-7710 using downloaded setup file.

  • Switch on your computer where you want to install Epson WF-7710 All-in-One Printer driver.
  • Until unless you suggested connecting the USB cable to the computer, please don’t connect it.
  • Download the setup file from above link if you didn’t download them. Run the setup file as administrator.
    At the execution of this wizard, you have to connect USB cable between Epson WF-7710 and your computer.
  • Wait for that and connect only when it asks you to connect. It will detect the Epson WF-7710 and go ahead to next step if all goes well.
  • Input the values for each step in the wizard and complete the install.
  • Now your printer is ready to use as the software of Epson WF-7710 All-in-One Printer driver installed successfully.
Model 3: How to install Epson WF-7710 All-in-One Printer driver manual way.

Using “Add a printer” option in Windows, how to install Epson WF-7710 All-in-One Printer driver manual way.

Requirements:

  1. Download printer application and setup file of Epson WF-7710 from the above-recommended link.
  2. USB cable to connect to the printer.

Guidelines to install Epson WF-7710 All-in-One Printer driver using downloaded setup file.

  • Switch on your computer where you want to install Epson WF-7710 All-in-One Printer driver.
  • Connect USB cable between computer and printer.
  • Extract the application zip files to a file location.
  • Click on Start button and Model “Printer.” You will get an option like “Add a printer.” Click on that.
  • The next instruction will ask to point out where the driver located. Do that according to the progress.
  • Answer the wizard options till configuring the Epson WF-7710.

The above instruction helped you to install Epson WF-7710 All-in-One Printer driver and make the printer working fine. Thank you for visiting us.

Join The Discussion

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Don`t copy text!